Handled various proposal study task , execution task in detailed Engineering offloaded by Aker Kvaerner , Norway.

Activity for various Offshore equipments like Sea Water Injaction Pumps, Sea Water Lift pumps, Injection Units, Vacuum Pumps, De-areators etc. for clients like STATOIL-HYDRO, BP, SHELL, RELIANCE etc.

Centrifugal Injection Gas Compressor driven by Gas Turbines :-DetailedReview and preparation of the FEED for the Modification of the Compressors Use for Purging the well and reducing the flaring the gases during startup and Shut down. Preparation of FEED for the modification of Purge Gas Centrifugal Compressor for Offshore application Oil Well for Habshan GASCO(Abu Dhabi Gas Company) which include the detailing of existing System and proposed modification with preparation of Scope for  EPC Contactors.

Multi Phase Pump ( Screw type and Helico Axial Type ) detailing for ADCO,which is handling the Oil, Gas and Water mixture as per the Oil well profile.

Vertical submersible caisson mounted Offshore Fire fighting pumps as per NFPA-20, which take sea water and deliver at various platform levels powered by DG set

• Kuwait National Petroleum Company(KNPC)
• Haldia Petroleum Ltd (HPL),Naphtha Cracker Unit(NCU)
• IOCL, Baroda Expansion Project( Residual Up Gradation project)
• Equipments handled as per API, SHELL DEP. Centrifugal pumps with motor/ turbine drivers, Metering Pumps, API Centrifugal compressor with motor / turbine as driver, Reciprocating Compressor, Blowers, Coke cutting pumps etc…
• Centrifugal Recycle Compressor of Hydrogen service, Coker Gas Compressor of Delayed Coker Unit of IOCL Baroda as Detail Engg.contractor(DEC) as well as PMC.
• Coke Cutting Pump for the delayed Coker unit Flowserve USA make,
• Make up Reciprocating Gas Compressor for DHDT unit

• Handled Filters , Clarifiers , Clarifoculaters for water treatment plant , screw conveyor, Inlet Chamber , Digester etc.for Pulp and Paper industries.

• Development of the gears as well as casting for PTO ( Power Take Off) in the automotive fields as per the  customer requirement.
• Development of input shafts with gears for customers like L&T John Deere,Carraro India Ltd 
• Designing fixture , process sheets ,control plans & necessary tooling for Plastic Processing equipment.

Joined as a Graduate Trainee Engineer in production & engineering department was selected through campus interview.

Preparation of the process sheet along with drawings of following items:

• 68/28 V TWIN SCREW.
• SPLIT HOUSING FOR 68/28 SCREW ASSEMBLLY.
• T-DIE (SHEET DIE) SIZE 1500 MM FOR FILM PLANTS.